The Best All-in-One
Nozzle for Misting

Misting Made Easy with Nozzles of the Future

All-in-one nozzles from AMN-Misting are completely installed without fittings and without prior and detailed planning which makes the assembly work significantly cheaper and more flexible.

The nozzle coupling is extremely robust and tested with a test pressure of at least 210 bar, which is more than 3 times the operating max (operating pressure 60 bar +/- 10 bar).

All nozzles from AMN-Misting contain anti-drip valve and nozzle tips in different variations. All AMN-Misting  nozzles has powerful O-rings and integrated PE filter to reduce clogging and extend the lifetime of the all-in-one nozzles.

Nozzle capacity sizes available from 2.3 l/h to 8.5 l/h. An all-in-one integrated solution that is significantly cheaper and easier to handle than other available solutions.

With the help of a simple drilling tool, a 3 mm hole is drilled in the pipe and the nozzle can be mounted very simply in the right position and angle to avoid the water mist will hit beams, ceilings, or the like with dripping damage as a result.

AMN-Misting is stock-bearing and able to quickly deliver all the necessary pieces needed for the complete module solution to your client’s project. We help you with everything from nozzlespipes & fitting, pumps, and controllers. And we provide you with a solution that is extremely efficient to install and enables you to have a cost edge.

null

Save time and money

You will save a lot of time and money using the AMN-Misting product line
null

Minimal investment

AMN-Misting have all products in stock, so you can test our solutions with a minimal expense
null

Efficient installment

Use of products and tools are so simple that you don’t need special training to use them

Extremely Easy Mounting

Mounting our misting nozzles on a pipe is extremely simple and fail-proof. With only simple tools anyone can learn to mount a nozzle in just 15 seconds as shown in the video:

  • Place the drilling tool in the desired position
  • Drill the hole through the tool
  • Press the mount on the pipe
  • Secure the nozzle on the mount

Our solutions are not only the best in terms of quality, reliability of operation and maintenance needs for the end customer, but also for you as a fitter, where you can deliver a top service in the shortest possible time.

See how much the different misting nozzle sizes spray

Grey is 2.3 l/h | Green is 3.5 l/h | Red is 6.0 l/h | Black is 8.5 l/h

Spray pattern for the different nozzle sizes

Grey 2.3 l/h

Green 3.5 l/h

Red 6.0 l/h

Black 8.5 l/h

High Pressure Cooling Parts from AMN-Misting

Our product line is designed as a modular system, where you can build the exact system your project needs. We use a minimum of basic components for you to have as many possibilities as possible without having trouble with spare parts.

This way we can also ensure that all our parts are of the highest quality. Our four product categories are:

  • The best All-in-One Nozzles for misting
  • Strong line of accessories with pipes and fittings
  • Customized and tested pump systems
  • Intuitive controllers with display

Click the button for a full overview of our product line with competitive prices and fast delivery from our own warehouse.

AMN Misting ApS Ceramic Nozzles

Misting is Desireable Throughout Many Industries

With just a few elements, the AMN-Misting system can be expanded indefinitely and for all conceivable tasks and solutions where water is required to be atomized for cooling, humidification or dust reduction etc.

High pressure humidification and cooling are to a large extent part of the future opportunities to reduce CO2 emissions and in every way save energy resources and increase well-being for both livestock and personel and production in general. Many systems are NOT dimensioned for the highest summer temperatures and therefore loses great effect when maximum cooling capacity is most needed.

Cooling between 2.5 to 10°C saves a lot of ventilation capacity both in reduced set-up costs and in reduced energy consumption during operation (smaller ventilation capacity needed).

Reducing the incoming air by 2.5 to 10°C in front of cooling surfaces for milk coolers, air-conditioning systems, server rooms, cooling surfaces for coolers and freezers in supermarkets and much more, can save significant amounts in system investment, operation and maintenance. In addition, high-pressure cooling and humidification are extensively used for dust control, disinfection, humidity control in the paper, pulp, and wood industry, in the electronics industry, and much more, including effective fire suppression.

Learn more about the right dimension of a high pressure system at the bottom of our Technical Information.

Production in agriculture, horticulture and industry can be significantly improved

In agriculture, the mortality of animals can be significantly reduced in the summer heat and it becomes much easier to control the behavior and feeding periods.

Production in agriculture and horticulture can be significantly improved due to more correct temperature, humidity and indoor climate in general.

Dust and odor reduction is often a positive side benefit of high-pressure humidification systems and is often used with great success for dust reduction in various waste management and dusty production in general.
Soaking the barn section before subsequent cleaning is a very effective side benefit of the systems.
Disinfection of building sections, especially in agriculture, is a clear side benefit of the facilities.

In the electronic, textile, printing, wood and paper production control of the humidity level is a necessity for the production.
A fact that also applies to fruit and food storage and production where a correct humidity is required, including in vegetable departments in supermarkets etc. Proper humidity significantly prolongs the storage time of vegetables and is thus a significant factor in reducing waste and emission of CO2.

Disinfection

A very current topic is how to reduce the risk of being infected by airborne viruses.
This applies not only to Corona, but also something like the flu and many others.

An atomized mist coming out of high-pressure nozzles is capable of capturing the majority of these viruses and dragging them down.

If the atomized mist is combined with certain chemicals, then the mist can be used for a very pleasant disinfection of residental areas and gathering points, where viruses otherwise would spread freely.
Our Safe Misting® controllers also have programs built-in for just this function.

Fire fighting

A fine mist with water is the ideal form of fire fighting with minimum use of water and very little water damage as a result.

Combined with an emergency power system (which you may already have) and a water tank, you will not get better or cheaper fire fighting.

AMN-Misting Demo Box

Changing your preferred supplier requires trust.

We have so high confidence in our products that we have made a demo box with a selection of our products for you to see our high quality.

Are you curious to try us out? Request a demo box through the link.

Request Demo Box Here

Home

Call us

Send email

Demo Box